Bill Bune Enterprises-Anoka Minnesota-motorcycle, snowmobile, atv & watercraft

(763)427-6738

(763)576-9924

Please email us for any inquiries:

josh@billbune.com

BORING

(Includes port champers & hone to finish size)

2-CYCLE

4-CYCLE

EACH CYLINDER (w/ customer piston)

each

65.00

EACH CYLINDER

each

60.00

V-FOURS (minimum)

each

70.00

OUTBOARD (Merc) (blind hole)

each

75.00

OUTBOARD (Johnson inline)

each

65.00

OUTBOARD (V-Four)

each

70.00

OUTBOARD (V-Six)

each

75.00

60 Degree (V-Six)

each

75.00

KOHLER, BRIGGS, etc.

each

65.00

HARLEY DAVIDSON

each

65.00

HARLEY Bore & Hone with torque plate

80.00

885 TO 1200 BIG BORE (w/ torque plates)

pair

250.00

OFFSET BORING

add

10.00

BLIND HOLE

add

10.00

TAPER OR CHOKE BORE

add

10.00

010" to .030" (each cylinder)	60.00
.031" to .060" (each cylinder)	65.00
over .060"	add 10.00 each

Add'l cut of .040"or less

FOUR CYLINDER

DECK CYLINDER ONLY	80.00
O’RING CYLINDER ONLY	50.00
INSTALL BIG BORE SLEEVES	240.00
INSTALL BIG BORE SLEEVES & DECK CYLINDER	270.00
BORE CASE FOR BIG SLEEVES	175.00
LABOR ONLY (Prices will be quoted upon examination)

SLEEVING

CUSTOMER PARTS ADD ..... 10.00
(Head Studs & Manifolds must be removed)
SLEEVE & BORE STANDARD 2 CYCLE		125.00
SLEEVE WITH HEAVY WALL EXTRA	add	20.00	min
SLEEVE CYLINDER WITH EXHAUST VALVES	add	25.00	min
REMOVE & REPLACE EXHAUST COMPONENTS		30.00	min.
MATCH SLEEVE TO PORTED CYLINDER	add	60.00	min.
BIG BORE SLEEVE	add	20.00
BORE CASE FOR BIG BORE SLEEVE	per hole	80.00
SLEEVE FOUR CYCLE (Drop in sleeve)		90.00
SLEEVE FOUR CYCLE (Cast in sleeve)		100.00
SLEEVE OUTBOARD (With ports cut)		195.00	min
SLEEVE OUTBOARD (With no precut ports)		250.00
SLEEVE KOHLER, BRIGGS, etc.		90.00
REPLATING CYLINDER	ea	225.00
REPLATE & WELD		250.00
REMOVE & REPLACE VALVES 2 CYCLE		30.00	min
Special Sleeves made to your specs,( prices will be quoted upon examination.)

HONING

HONE NIKASIL (Diamond)	each	25.00
DEGLAZE HONE	each	10.00
RIDGED HONE	each	15.00
RIDGED HONE LARGE KOHLER OR BRIGGS	each	25.00
HONE .001" TO .003" MATERIAL	each	25.00
HONE .003" TO .010" MATERIAL	each	60.00
EXTRA FINE 600 GRIT FINISH	each	10.00
EXTRA FINE 400 GRIT FINISH	each	10.00

CHEMICAL REMOVAL OF ALUMINUM FROM BORE		25.00
*STUD AND MANIFOLD REMOVAL	(each stud) add	2.00
*GASKET REMOVAL PER CYLINDER	each	2.00 (min)
* Extra charge for gasket, stud & manifold removal * Rush charge $20.00 minimum per cylinder PRICES ARE LABOR ONLY

REBUILDING & TRUE

		2-CYCLE	4-CYCLE
1 CYLINDER CRANK		60.00	60.00
1 CYLINDER CRANK	heavy wt		75.00
*2 CYLINDER CRANK			140.00
*2 CYLINDER CRANK	heavy wt	.00	175.00
**3 CYLINDER CRANK	light wt	.	200.00
**3 CYLINDER CRANK	heavy wt		225.00
***4 CYLINDER CRANK			300.00
THUNDERCAT CRANK		300
HONDA CR’S WITH FACTORY STUFFER		75.00

CRANKSHAFT TRUING

		2-CYCLE	4-CYCLE
1 CYLINDER			25.00
2 CYLINDER	min	50.00
2 CYLINDER TRUE & WELD (GOOD CRANK)	min	75.00
3 CYLINDER	min	80.00
3 CYLINDER TRUE & WELD (GOOD CRANK)	min	130.00
4 CYLINDER		125.00	125.00
4 CYLINDER TRUE & WELD (GOOD CRANK)	min	175.00

CRANKSHAFT WELDING

1 CYLINDER		20.00
2 CYLINDER		35.00
3 CYLINDER		50.00
4 CYLINDER		60.00
* Extra charge for making one good crank from two or more bad cranks (minimum) 40.00 * Extra charge for rebuilding previously welded crank (per weld) 10.00 R&R one complete crank journal or more same as complete rebuild * R&R on one crank (end) only (min + true) 50.00

REINDEXING CRANKSHAFT

FOR REINDEXING OF CRANKSHAFT, ADD TO REBUILD CHARGE:

2 CYL/30.00	3 CYL/45.00	4 CYL/50.00
CHECK INDEX	2 CYL/10.00	3 CYL/15.00
REMOVE SPUN OR SEIZED BEARING add 40.00 minimum

PULL CLUTCH

min

20.00

PULL MAG. (FLYWHEEL)

min

20.00

ROD WORK

STRAIGHTEN RODS	min	ea	10.00
SIZE RODS (per end)	min	ea	12.00
BALANCE RODS (match weight)		ea	15.00
700/800 POLARIS CRANK & CASE UPDATE		ea	175.00
PRICES ARE LABOR ONLY

MILL HEAD

1 CYLINDER		40.00
1 CYLINDER (OFFSET OR ANGLED PLUG)	min	50.00
2 CYLINDER SINGLE CASTING	min	50.00
3 CYLINDER SINGLE CASTING	min	75.00
*Add for removal of more than .030"		10.00
SURFACE ANY HEAD .001" OR LESS (per cyl)	each	10.00
MILL CYLINDER BASE (SINGLE)	min	60.00
MILL CYLINDER BASE (TWIN)	min	75.00
MILL CYLINDER BASE (TRIPLE)	min	100.00
DECK CYLINDER (SINGLE)	min	40.00
DECK CYLINDER WITH OFFSET PLUG (TWIN)	min	75.00
DECK CYLINDER SINGLE CASTING (3 & 4 CYL)	min	100.00
*Remove More than .020"	add	10.00
OPEN CHAMBER FOR BIG BORE	min each	50.00
RECUT SQUISH BAND	min	50.00
RECUT DOME	each	50.00
WELD AND MACHINE NEW SQUISH BAND	min	75.00
MILL HEAD AND RECUT SQUISH (One Setup)	each cyl	55.00
MILL TWIN & CUT 2 SQUISH (One Setup)		110.00
MILL TWIN & CUT 2 SQUISH (Two Setups)		125.00
MILL 3 CYLINDERS & CUT 3 SQUISH		150.00
POLISH COMBUSTION CHAMBER		15.00
CHECK CC VOLUME (per chamber)	min	20.00
SET cc VOLUME	(per hour)	75.00

ALL PRICES : MINIMUM

PRICES ARE LABOR ONLY

STANDARD VALVE JOBS

2 VALVES		75.00
4 VALVES		125.00
5 VALVES		145.00
6 VALVES		160.00
8 VALVES		180.00
16 VALVES		320.00
20 VALVES		395.00
HARLEY DAVIDSON, TRIUMPH, BMW, ETC.	pair	160.00
BRIGGS & KOHLER		60.00

EXTRA CHARGE FOR DISASSEMBLY (ROCKERS/CAMS, ETC)

VALVES

GRIND VALVES ONLY	each	3.50
LIGHTEN AND POLISH		7.50
INSTALL OVERSIZE VALVE	add	25.00
BACK CUT VALVE		5.00
GRIND VALVE SEAT	3 angle	15.00
GRIND VALVE SEAT	1 angle	25.00

GUIDES

SUZUKI GUIDES	add per guide	5.00
REMOVE AND REPLACE	each	15.00
MAKE OVERSIZE GUIDE	each	50.00
REAM GUIDES TO SIZE	each	10.00

HEAD WORK

MEASURE CHAMBERS cc VOLUME	each	20.00
ADJUST CHAMBER cc VOLUME	per hour	75.00
INSTALL NEW VALVE SEAT	min	75.00

HEAD MILLING (SINGLE CASTING)

1 CYLINDER		60.00
2 CYLINDER		80.00
3 CYLINDER		100.00
4 CYLINDER		125.00
*Over .020" stock removal (addl)	min	10.00

EXTRA CHARGE FOR DISASSEMBLY (ROCKERS/CAMS, ETC)

ALL PRICES : MINIMUM

TWO CYCLE

0 - 100 cc		125.00
125 - 200 cc	min	150.00
250 - 500 cc	min	175.00
PORTING TO CUSTOMER SPECS	minimum	150.00
MATCH MANIFOLD		10.00
POLISH EXHAUST	min	30.00
4-CYCLE	SINGLES TO FOURS	(CALL FOR QUOTE)

LABOR ONLY EACH CYLINDER

PISTONS

DRILL FOR LUBE & COOLING	each	25.00
CERAMIC HEAT BARRIER	each	25.00
MOLY COAT	each	25.00
COAT AND HEAT BARRIER	each	40.00
GLASS BEAD AND DECARBON	each	20
CUT SKIRT	1-3 pistons	10.00/ea
	4 or more	7.00/ea
CUT BOOST PORT	each	40.00
MATCH PISTON WEIGHTS (MINIMUM)	each	25.00
LIGHTEN AND MATCH	each	25.00
DRILL FOR EXHAUST BRIDGE	each	25.00
GAS PORT	each	50.00
CUT OR RESHAPE DOME	each	30.00
RELIEVE FOR EXPANSION	each	20.00
OPEN PIN BOSSES		20.00

ENGINE LABOR/LOWER END

DIRTBIKE/ATV: 2-Cycle

49cc - 125cc		250.00
175cc - 500cc		300.00
without Transmission	min	175.00

ALL 4 CYCLE

get quote

$125.00 - $300.00

SNOWMOBILE & WATERCRAFT

TWINS	min	175.00
TRIPLES	min	200.00

TWO CYCLE TOP END ASSEMBLY

per cyl

50.00

FOUR CYCLE TOP END ASSEMBLY (MINIMUM)

per cyl

150.00

PISTONS COATINGS

MOLY COAT (PISTON SKIRT)	ea	25.00
THERMO BARRIER COAT (PISTON DOME)	ea	25.00
MOLY & THERMO COAT		40.00
COAT USED PISTONS	add	10.00
THERMO COAT CHAMBERS		20.00
THERMO COAT VALVES	ea	10.00

FORK TUBES

STRAIGHTEN FORK TUBE (DISASSEMBLED)	min	each	40.00
STRAIGHTEN FORK TUBE (ASSEMBLED OFF BIKE)	min	each	50.00
STRAIGHTEN FORK TUBE WITH KINK (ADD)	min	each	10.00
STRAIGHTEN TRIPLE TREE AND/OR STEERING STEM			80.00
STRAIGHTEN TOP CLAMP			25.00
STRAIGHTEN AXLE	min		25.00
CHECK FORK TUBE FOR STRAIGHT (ASSEMBLED)			10.00
INSTALL FORK SEALS (ONLY NO TRUING)	min	ea	50.00
INSTALL FORK SEALS WITH TRUING		ea	90 .00
All prices minimum LABOR ONLY

LABOR ONLY

		2-CYCLE	4-CYCLE
SPARK PLUG 10 TO 18 mm	HELICOIL		30.00
SPARK PLUG 10 TO 18 mm	TIMESERT		40.00

ALL THREAD REPAIR (6-10 mm & 1/4 to 3/8 inch)

each

20.00

HELICOIL INSERTS

6 mm - 10 mm	2.50
12 mm - 18 mm	3.00
1/4 - 3/8	2.50
7/16 - 9/16	3.00

TIMESERTS

6 mm - 10 mm	3.00
12 mm - 18 mm	3.50
1/4 - 3/8	3.00
7/16 - 9/16	3.50

FOR REMOVAL OF BROKEN STUDS SEE (CASE REPAIR)

All prices minimum

LABOR ONLY

REMOVE BROKEN STUD (MINIMUM)	each	40.00
REMOVE BROKEN STUD REQUIRING WELDING (MINIMUM)	each	50.00
REMOVE BROKEN STUD W/ BROKEN DRILL BITS, ETC (WELDING EXTRA) MINIMUM	each	50.00
REMOVE AND REPLACE STUDS	each	2.00
REMOVE AND REPLACE HEAD STUDS, CHASE THREADS	each	3.00
REMOVE AND REPLACE CASE STUDS, ADD COST OF NEW STUDS IF NECESSARY	each	3.00
For repair of broken or cracked cases requiring welding or machining, bring in for examination and a quote. Cost of helicoils must be added (See thread repair) All prices minimum LABOR ONLY

BORE CYLINDER	each	65.00
BORE & HONE CYL WITH TORQUE PLATE	each	80.00
SLEEVE BORE AND FINISH HONE	each	125.00
HONE CYLINDER (rigid hone)	each	25
HONE CYLINDER (deglaze)	each	15.00
*STANDARD VALVE JOB	ea. head	80.00
GRIND SEAT ONLY (3 angle)	each	15.00
REFACE VALVE	each	10.00
MODIFY GUIDES FOR OIL SEALS	each	45.00

CARBURETOR BORING (DISASSEMBLED) $75

CARBURETOR BORING ((ASSEMBLED) $100 SONIC CLEAN CARBS (DISASSEMBLED)$45

ATC AXEL STRAIGHTENING MINIMUM $70

CLUTCH TRUING (DISASSEMBLED) $75

BALANCE PRIMARY CLUTCH $40

BALANCE SECONDARY CLUTCH $50

TRUE & BALANCE CLUTCH $125

DISASSEMBLE PRIMARY $30

DISASSEMBLY SECONDARY $20

PULL CLUTCH OR MAG MINIMUM $20

CLUTCH REBUILDING MINIMUM $80

CHARGE SHOCK $15

TRUE DRIVERS 4 WHEELS $80

TRUE DRIVERS 2 WHEELS $70

MACHINE HEAD FOR DUAL PLUGS MINIMUM $125

PROP SHAFT STRAIGHTENING MINIMUM $30

R & R DRIVERS (2) SNOWMOBILE $60

R & R DRIVERS (4) $75

HELI-ARC WELDING

ALUMINUM

MAGNESIUM

STAINLESS STEEL

CHROMOLY STEEL

MILD STEEL

SILVER SOLDERING

WIRE FEED WELDING

SPRAY WELDING

STICK WELDING

GAS WELDING

BRAZING AND CUTTING

PRODUCTION WELDING

PLASMA CUTTING

MACHINE SHOP SERVICES - $75.00/HR

MILLING - LATHE – DRILLING – BORING – PRESS WORK

BENDING – STRAIGHTENING – METAL SAWING & CUTTING

HIGH PERFORMANCE

ATV PISTONS

FORGED FROM HIGH SILICONE ALUMINUM ALLOY FOR MAXIMUM STRENGTH AND DEPENDABILITY.

DESIGNED TO INCREASE PERFORMANCE AND WITHSTAND THE TREMENDOUS DURESS CREATED BY OFF ROAD CONDITIONS.

No pictures or information may be reproduced without our express written consent

Home | Sitemap | Mobile Link | Useful Links